Item NO.:
JLY-Z50Application:
As thickening agent for water based ink,patint&coatingSolid Content:
50%Clour:
Transparent with light yellow liquidSolvent:
Water or environmental hydrophilic solventDescription:
JLY-Z50 is as non-ionic polyether polyurethane thickener, endows the recipe with a false plastic condition. It provide effect thickening property in the low and middle share speed, also can provide higher thixotropic property and thickening property to the system. It is not dependent on the pH value, so it can be used alone, and also can used together with other thickener. suitable for all kinds of exterior coatings, water based paint, water based adhesive, water based ink system, etc. need to dilute with an alcohol ether solvent, and used it after homogeneous mixing，Could combine with other thickening additives to obtain the required rheological properties
Application
Suitable for waterborne coatings and adhesive
Technical Data
|
Item |
JLY-Z50 |
|
Appearance |
Transparent withlight yellow liquid |
|
Solid Content (%) |
50±1（150℃，45min） |
|
Viscosity(mPa·S(25℃)) |
6000-8000 |
|
Lonicity |
Non-ionic |
|
Solvent |
Water or environmental hydrophilic solvent |
Character
1.High efficient performance offalse plastic, and obviously improving the high viscosity of coating under low shear
2.Goodcompatibility with various water based resin
3. Excellentfilm-forming,high gloss,better false plastic performance than cellulose and alkali swelling agent
4. Usually couldn’t be influenced by change of PH value
Storage
Suggesting sealed storage, temperature from 5℃to 35℃,can’t freeze Shelf life:12 months
Package
125Kg、50KG/Drum
JLY-ZM50 is as an non-ionic polyether type polyurethane thickener(HEUR) as rheological agent with medium shear viscosity. Widely used for coating and painting,ink,adhesive etc
S-6970 is a innovative polyurethane resin compositions for Gravure printing ink as eco-friendly PU resin with high solid content and semi-forming-film performance
Polyurethane dispersions (PUDs) are water-based polymeric materials that find wide application across various industries, including the production of gloves. PUDs are known for their excellent film-forming properties, high elasticity, and good mechanical strength. They are commonly used as coating materials in glove manufacturing due to their desirable properties, such as flexibility, durability, and resistance to abrasion.
JLY-L01 is as water-based anion aliphatic polyurethane dispersion emulsion, excellent physical and chemical properties, suitable for surface glossy varnish of wood, textile, plastics, leather etc
R-1787 as solvent based acrylic resin for film lamination printing ink, available for the production of benzene-free and ketone-free gravure printing ink
S-6930 is highly functional polyurethane resin for the production of benzene-free and ketone-free plastic film gravure surface printing ink with good combination performance
JLY-1577 as aqueous polyurethane resin for film reverse printing ink, soluble in both water and alcohol, available for the production of gravure printing ink with good adhesion
JLY-1035 as environmental waterborne(water-based) polyurethane resin and polyurethane emulsion, which be useful for film gravure reverse printing ink, soluble in water, especially for the production of gravure printing pigment ink
IPv6 network supported
English
русский
español
português
العربية
日本語
한국의
Türkçe
ไทย
हिंदी
Indonesia 
