Item NO.:
JLY-Z50Application:
As thickening agent for water based ink,patint&coatingSolid Content:
50%Clour:
Transparent with light yellow liquidSolvent:
Water or environmental hydrophilic solventDescription:
JLY-Z50 is as non-ionic polyether polyurethane thickener, endows the recipe with a false plastic condition. It provide effect thickening property in the low and middle share speed, also can provide higher thixotropic property and thickening property to the system. It is not dependent on the pH value, so it can be used alone, and also can used together with other thickener. suitable for all kinds of exterior coatings, water based paint, water based adhesive, water based ink system, etc. need to dilute with an alcohol ether solvent, and used it after homogeneous mixing，Could combine with other thickening additives to obtain the required rheological properties
Application
Suitable for waterborne coatings and adhesive
Technical Data
|
Item |
JLY-Z50 |
|
Appearance |
Transparent withlight yellow liquid |
|
Solid Content (%) |
50±1（150℃，45min） |
|
Viscosity(mPa·S(25℃)) |
6000-8000 |
|
Lonicity |
Non-ionic |
|
Solvent |
Water or environmental hydrophilic solvent |
Character
1.High efficient performance offalse plastic, and obviously improving the high viscosity of coating under low shear
2.Goodcompatibility with various water based resin
3. Excellentfilm-forming,high gloss,better false plastic performance than cellulose and alkali swelling agent
4. Usually couldn’t be influenced by change of PH value
Storage
Suggesting sealed storage, temperature from 5℃to 35℃,can’t freeze Shelf life:12 months
Package
125Kg、50KG/Drum
JLY-ZM50 is as an non-ionic polyether type polyurethane thickener(HEUR) as rheological agent with medium shear viscosity. Widely used for coating and painting,ink,adhesive etc
S-6961 is high performance forming-film polyurethane resin for production of gravure surface printing ink as eco-friendly PU resin
R-1787 as solvent based acrylic resin for film lamination printing ink, available for the production of benzene-free and ketone-free gravure printing ink
R-6835 as retort-high temperature boiling polyurethane resin for lamination ink ,available for the production of benzene-free and ketone-free gravure pigment ink
polyurethane resin is widely used for production of coating&paint, ink ,adhevise etc,and good adhesion on papper、leather、fabric、glass and plastic substrate with flexibility and wear resistance
JLY-ZM50 is as an non-ionic polyether type polyurethane thickener(HEUR) as rheological agent with medium shear viscosity. Widely used for coating and painting,ink,adhesive etc
S-6970 is a innovative polyurethane resin compositions for Gravure printing ink as eco-friendly PU resin with high solid content and semi-forming-film performance
Polycarbonate modified polyurethane (PCMPU) is a type of material that hasPolycarbonate modified polyurethane (PCMPU) is a type of material that has found extensive use in the leather industry for surface finishing and coating. It is a thermosetting polymer that combines the toughness and durability of polyurethane with the heat resistance and light stability of polycarbonate
IPv6 network supported
English
русский
español
português
العربية
日本語
한국의
Türkçe
ไทย
हिंदी
Indonesia 
